Author Archives: Jeroen Plomp

SEMSANS – SANS work with Bath University finally published with cover art!

Posted on 26/06/2020 by Jeroen Plomp

Back in 2016 we started a collaboration with Bath University (Prof. Karen Edler) where a Master student (Joost Zeeuw) explored samples that were suited to measure SANS and SEMSANS signal at the same time. At that time we had finished … Continue reading →

Posted in Soft Matter | Leave a comment

MISANS looking at water

Posted on 03/01/2020 by Jeroen Plomp

In the week of the 9th of December 2019 we had the opportunity to measure a “MIEZE” signal within a SANS measurement -> MISANS. With this technique we are able to look into the self-diffusion of water.  So within the … Continue reading →

Posted in MISANS, NEWS, Soft Matter | Leave a comment

MIEZE article published

Posted on 03/01/2020 by Jeroen Plomp

Finally our paper on the commissioning of the MIEZE mode of Larmor is published on the 3rd of December 2019. It can be viewed here: Time of Flight Modulation of Intensity by Zero Effort on Larmor Almost at the same … Continue reading →

Posted in NEWS, Soft Matter | Leave a comment

Learning from insects

Posted on 01/10/2019 by Jeroen Plomp

Recently a very nice paper appeared with significant contributions from SESANS on Larmor and Delft. It is about understanding how colors in nature are produced and with the goal to produce better paints Click here to view full article

Posted in NEWS | Leave a comment

Larmor celebration at ISIS, closure of project

Posted on 05/09/2019 by Jeroen Plomp

On the 27th of August a group of 13 traveled to ISIS to participate in the celebration of the closure of the Larmor project. In the evening there was a diner at the Cosener’s house in Abingdon. The next day … Continue reading →

Posted in NEWS, Soft Matter, The Instrument | Leave a comment

First MIEZE signals generated by LARMOR

Posted on 06/01/2019 by Jeroen Plomp

On Thursday 11th October 2018 we have produced and measured the very first TOF MIEZE signal on LARMOR! With this MIEZE mode it is possible to measure dynamics in a sample (0.1ns -10ns). This mode gave us great challenges during … Continue reading →

Posted in Soft Matter | Leave a comment

Impression of LARMOR instrument in SESANS mode

Posted on 09/10/2017 by Jeroen Plomp

Here an impression of the instrument in SESANS mode, mid September 2017.  

Posted in NEWS, SESANS | Leave a comment

Pinned to the door

Posted on 03/05/2017 by Jeroen Plomp

We proudly pinned a new picture to the door of the measuring cabin of LARMOR. The top (circular) plot is a SANS pattern that is the basic mode of operation of the instrument. Since 19-02-2017 we added a so called … Continue reading →

Posted in NEWS | Leave a comment

Final installation of LARMOR components

Posted on 03/05/2017 by Jeroen Plomp

Installation of all components on the LARMOR beam line on the 3rd of February 2017. Now these components, developed in Delft, found there final destination in the LARMOR blockhouse. Now the commissioning and debugging can start! Below we have the … Continue reading →

Posted in NEWS | Leave a comment

Posted on 14/02/2016 by Jeroen Plomp

We are very exited because a all things are coming together. We have installed the spin-echo components on the first arm (pre-sample) of LARMOR at ISIS. Now we have prepared everything for a experiment that has never been done! We … Continue reading →

Posted in Soft Matter | Leave a comment